More and more young people choose to install projectors at home to meet the needs of enjoying movie theater-like watching at home. On weekends, meet with three or five friends. When they come to play at home, turn on the projector to enjoy the comfort at home. Relaxing atmosphere.
How do the wires go
Generally speaking, open wiring is suitable for hard-covered houses, because the line for installing the projector has not been planned in advance. Although the open wiring is not good-looking, it is easy to install. The hidden wires must be slotted on the wall. This wiring method is suitable for houses that are still under renovation or in preparation for installation. Plan the projector circuit in advance, which is safer and more beautiful. There are three lines to consider when routing the projector. Two HDMI lines and one audio line correspond to the input and output of the projector.
With the development of technology, there are many wireless connections on the market, but they may be affected by the signal, not stable, and the picture quality will be worse.
Reserve enough sockets
When installing a projector at home, four sockets are generally reserved. There is one next to the projector, one curtain, one playback source and one audio amplifier.
Projector installation method
There are two ways to install projectors commonly used in homes, front projection installation and ceiling installation. Front projection is a projection method in which the projector and the viewer are on the same side, and the lens is facing the screen. A common installation location is where a partition sticks out on the wall directly opposite the screen. In addition to a projector, it can also be connected to a playback device.
Ceiling installation is a projection method in which the projector is hung on the roof, and it can be arranged on the roof facing the front of the screen. When installing, pay attention to whether the chandelier is still installed in the room, and don’t let the hanging chandelier block the projection.
Projecting on a white wall certainly does not feel good when projecting on a screen. Most families will install an electric screen, which can be retracted and installed on the roof, and the height can be adjusted freely.
It should be noted that the electric curtain cannot be close to the wall, and at least 100mm of heat dissipation space must be ensured.
The same is true when choosing seats in a movie theater. Regardless of height, the most comfortable distance should be the center. How far is this location from the curtain? The answer is 0.87 times the width of the curtain. In other words, if the screen width is 2.6M, the best viewing distance is 2.3M.